225 lines
9.1 KiB
INI
225 lines
9.1 KiB
INI
ODROIDXU-UBOOT-CONFIG
|
|
|
|
# U-Boot Parameters
|
|
setenv initrd_high "0xffffffff"
|
|
setenv fdt_high "0xffffffff"
|
|
|
|
# Mac address configuration
|
|
setenv macaddr "00:1e:06:61:7a:87
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
# Basic Ubuntu Setup. Don't touch unless you know what you are doing.
|
|
# --------------------------------
|
|
|
|
|
|
|
|
setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root=UUID=<UUID> rootwait ro fsck.repair=yes net.ifnames=0"
|
|
|
|
|
|
|
|
# --- Screen Configuration for HDMI --- #
|
|
# ---------------------------------------
|
|
# Uncomment only ONE line! Leave all commented for automatic selection.
|
|
# Uncomment only the setenv line!
|
|
# ---------------------------------------
|
|
# ODROID-VU forced resolution
|
|
# setenv videoconfig "video=HDMI-A-1:1280x800@60"
|
|
# -----------------------------------------------
|
|
# ODROID-VU forced EDID
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
|
|
# -----------------------------------------------
|
|
# 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
|
|
# setenv videoconfig "video=HDMI-A-1:1920x1080@60"
|
|
# -----------------------------------------------
|
|
# 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
|
|
# -----------------------------------------------
|
|
# 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
|
|
# setenv videoconfig "video=HDMI-A-1:1920x1080@50"
|
|
# -----------------------------------------------
|
|
# 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
|
|
# -----------------------------------------------
|
|
# 1440x900 with monitor provided EDID information.
|
|
# setenv videoconfig "video=HDMI-A-1:1440x900@60"
|
|
# -----------------------------------------------
|
|
# 1440x900 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
|
|
# -----------------------------------------------
|
|
# 1280x1024 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
|
|
# -----------------------------------------------
|
|
# 1280x720 (720P) with monitor provided EDID information. (720p-edid)
|
|
# setenv videoconfig "video=HDMI-A-1:1280x720@60"
|
|
# -----------------------------------------------
|
|
# 1280x720 (720P) without monitor data using generic information (720p-noedid)
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
|
|
# -----------------------------------------------
|
|
# 1024x768 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
|
|
# -----------------------------------------------
|
|
# 1024x600 without monitor data using generic information (ODROID VU7+)
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
|
|
# -----------------------------------------------
|
|
# 800x600 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
|
|
# -----------------------------------------------
|
|
# 800x480 without monitor data using generic information (ODROID 7")
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
|
|
# -----------------------------------------------
|
|
# 720x576 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
|
|
# -----------------------------------------------
|
|
# 720x480 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
|
|
# -----------------------------------------------
|
|
# 640x480 without monitor data using generic information
|
|
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
|
|
|
|
|
|
# --- HDMI / DVI Mode Selection ---
|
|
# ------------------------------------------
|
|
# - HDMI Mode
|
|
setenv vout "hdmi"
|
|
# - DVI Mode (disables sound over HDMI as per DVI compat)
|
|
# setenv vout "dvi"
|
|
|
|
|
|
# --- HDMI CEC Configuration ---
|
|
# ------------------------------------------
|
|
setenv cecenable "false" # false or true
|
|
# set to true to enable HDMI CEC
|
|
|
|
|
|
# --- CPU Governor Setup ---
|
|
# Uncomment only one line. New governor is set after 90secs after boot.
|
|
# ------------------------------------------
|
|
# - Performance (Keep all the CPU's at Maximum frequency)
|
|
setenv governor "performance"
|
|
# ------------------------------------------
|
|
# - Ondemand
|
|
# setenv governor "ondemand"
|
|
# ------------------------------------------
|
|
# - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
|
|
# setenv governor "interactive"
|
|
# ------------------------------------------
|
|
# - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
|
|
# setenv governor "conservative"
|
|
# ------------------------------------------
|
|
# - Powersave (Keeps the CPU's to the lowest possible temps)
|
|
# setenv governor "powersave"
|
|
|
|
# Enable/Disable ODROID-VU7 Touchsreen
|
|
setenv disable_vu7 "true" # false
|
|
|
|
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# HDMI-PHY Parameter Control
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# HDMI Hot Plug detection
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# Forces the HDMI subsystem to ignore the check if the cable is connected or
|
|
# not.
|
|
# false : disable the detection and force it as connected.
|
|
# true : let cable, board and monitor decide the connection status.
|
|
#
|
|
# default: true
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
setenv HPD "true"
|
|
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# TMDS data amplitude control.
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# 1LSB corresponds to 20 mVdiff amplitude level.
|
|
# tx_amp_lvl : 0 = 760 mVdiff(Min), 31 = 1380 mVdiff(Max)
|
|
#
|
|
# Hardkernel default hdmi_tx_amp_lvl = 31(1380 mVdiff);
|
|
#------------------------------------------------------------------------------
|
|
setenv hdmi_tx_amp_lvl "31"
|
|
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# TMDS data amplitude fine control for each channel.
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# 1LSB corresponds to 20 mVdiff amplitude level.
|
|
# tx_lvl : 0 = 0 mVdiff(Min), 3 = 60 mVdiff(Max)
|
|
#
|
|
# Hardkernel default
|
|
# hdmi_tx_lvl_ch0 = 3, hdmi_tx_lvl_ch1 = 3, hdmi_tx_lvl_ch2 = 3,
|
|
#------------------------------------------------------------------------------
|
|
setenv hdmi_tx_lvl_ch0 "3"
|
|
setenv hdmi_tx_lvl_ch1 "3"
|
|
setenv hdmi_tx_lvl_ch2 "3"
|
|
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# TMDS data pre-emphasis level control.
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# 1LSB corresponds to -0.45dB emphasis level except for 1
|
|
# tx_emp_lvl : 0 = 0 db(Min), 1 = -0.25 db, 2 = 0.7 db, 15 = -7.45 db(Max)
|
|
#
|
|
# Hardkernel default hdmi_tx_emp_lvl = 6 (-2.50 db);
|
|
#------------------------------------------------------------------------------
|
|
setenv hdmi_tx_emp_lvl "6"
|
|
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# TMDS clock amplitude control.
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# 1LSB corresponds to 20 mVdiff amplitude level.
|
|
# clk_amp_lvl : 0 = 790 mVdiff(Min), 31 = 1410 mVdiff(Max)
|
|
#
|
|
# Hardkernel default hdmi_clk_amp_lvl = 31 (1410 mVdiff)
|
|
#------------------------------------------------------------------------------
|
|
setenv hdmi_clk_amp_lvl "31"
|
|
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# TMDS data source termination resistor control.
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
#
|
|
# tx_res :
|
|
# 0 = Source Termination OFF(Min), 1 = 200 ohm, 2 = 300 ohm, 3 = 120 ohm(Max)
|
|
#
|
|
# Hardkernrel default hdmi_tx_res = 0 (Source Termination OFF)
|
|
#------------------------------------------------------------------------------
|
|
setenv hdmi_tx_res "0"
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
|
|
|
|
# Load kernel, initrd and dtb in that sequence
|
|
fatload mmc 0:1 0x40008000 zImage
|
|
fatload mmc 0:1 0x42000000 uInitrd
|
|
fatload mmc 0:1 0x44000000 <DTB>
|
|
|
|
# set FDT address
|
|
fdt addr 0x44000000
|
|
|
|
if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
|
|
if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
|
|
|
|
# final boot args
|
|
setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control} ${hid_quirks}"
|
|
# drm.debug=0xff"
|
|
# Boot the board
|
|
bootz 0x40008000 0x42000000 0x44000000
|